This blade grinds the material, unlike the other blades which cut through. But it can also cut most hard plastics. Some band saws that use diamond as a blade are used to crop and slice monocrystalline silicon ingots.
This saw blade also has rectangular teeth containing diamond crystals to make them extra tough. These saws are manufactured by a special technology with the stainless steel metal for optimal cycle movement, and the special diamond abrasives.
This band saw can deliver results in high speed and can endure long and smooth cutting surface of wafers. In band sawing, the process uses a flexible, toothed blade welded into a band. The band rides on wheels that are driven by two pulleys. The wheels are also guided through the work cut off or contour.
The blade is diamond-coated accomplished through electroplating. Electroplating is a process in which an electrical current entrusts the coating onto the blade, producing a hard and brittle Ni matrix that keeps the gem in place. In turn, it allows the precise cutting on a variety of materials.
All d-band saw blades are custom-manufactured to best meet your exact needs and application requirements. Also, the blades are custom fit for a specific material to be cut.
The blades are also used to cut silicon igots. They are also used in carbide, pyrex, carbon or graphite and masonry materials. The band saws require special set up in order to function well. In addition, for them to last longer, they should be given proper care.
Caring for the band saw and its blade is the key to having a continuous efficient performance. Even when the blades are made to last, they should still require exceptional care and precaution, especially in cutting very tight curves to prevent twisting.
It is hence important to allow the saw blade to cut at its own speed. If there is a need for you to back out of a cut, turn the blade speed into a low pace and back the blade out gently. Like the diamond band saw, a CBN wheel is used for grinding, drilling and cutting abrasive materials into various shapes. CBN stands for Cubic Boron Nitride.
In using the saw for cutting plastic, there are chances when the blade binds up from cutting a softer material. If such thing happens, all you need to do is cut a few inches of scrap float glass to clear the diamond crystals. It is very important that you will not use a diamond band saw to cut metals because they will only destroy your blades.
Do you need a special Diamond band saw CBN wheel? Go to http://www.cdtusa.net/ to find it. We at Continental Diamond Tool can custom product cutting tools for you industry. You can also select ready made cutting tools from our inventory. Go to CBN wheel and see the cutting tools and supplies that you can get.